Sony PCV-R538DS - Manual (Page 423)

outer panel up over the unit and set it aside.
Inserting an Add-in Board
Models PCV-R536DS/PCV-R538DS/PCV-R539DS
There are three PCI expansion slots in this computer. One slot contains the factory-installed
modem card. The other slots are empty, enabling you to install add-in boards to expand the
functionality of your system. You can install add-in boards that support Microsoft
®
Windows
®
98
Second Edition and the PCI revision 2.1 specification.
Model PCV-R532DS
There are four PCI expansion slots in this computer. Slot 1 contains the factory-installed modem
card, and Slot 2 contains the i.LINK
®
(IEEE-1394) card. The other slots are empty, enabling you to
install add-in boards to expand the functionality of your system. You can install add-in boards that
support Windows
®
98 and the PCI revision 2.1 specification.
To insert an add-in board
Make sure you observe the proper safety precautions when you add boards to your Sony computer. See
Notes on Use
1. Shut down your computer and turn off all peripheral devices, such as your printer.
2. Unplug your computer and any peripheral devices.
3. Remove the cover as described in Removing the Cover .
4. Locate one of the available expansion slots. Remove the screw, and then remove the slot cover.
Page 423