Using special effects – digital effect, Using special effects – Sony DCR-TRV460 User Manual
Page 41
D:\##SAGYO\DTP-shanhai-agari\824719S DCRTRV360-US\824719S DCR-TRV360_US\824719S DCR-
TRV360_US\3087921111 DCR-TRV360\01GB04REC.fm
master:Right
Rec
o
rdin
g
DCR-TRV360/TRV361/TRV460
3-087-921-11(1)
Recording
41
4
Touch the desired effect, then touch
.
When you touch [OVERLAP], [WIPE] and
[DOT FADER], the image on the tape in
your camcorder is stored as a still image.
(While storing the image, the screen turns to
blue.)
5
Press REC START/STOP.
The fader indicator stops flashing and
disappears when the fade is complete.
To cancel the operation
Follow steps 2 and 3, then touch [OFF] in step 4.
b
Notes
• For DCR-TRV460:
The OVERLAP, WIPE and DOT FADER functions
do not work with tapes recorded on other devices in
the Hi8
/standard 8 mm
system.
• The title does not fade in or fade out. Erase it before
operating the FADER function if it is not needed.
• You cannot use the FADER function together with:
– Super NightShot plus function
– Color Slow Shutter function
– Digital effect
– [INTERVAL REC] (Interval recording)
– [FRAME REC] (Frame recording)
– Self-timer
Fading in from still image on the
“Memory Stick” – Memory overlap
You can fade in from the still image on the
“Memory Stick” to the movie currently being
recorded on the tape.
1
Check that you have a “Memory Stick”
with the still image to be superimposed
and a tape in your camcorder.
2
Slide the POWER switch to select the
CAMERA-TAPE mode.
3
Touch
.
4
Touch
[
MENU].
5
Select
(PICT. APPLI.), then
[
OVERLAP] by touching
/
and touch
.
The recorded image appears on the
thumbnail screen.
6
Touch
(previous) /
(next) to
select the still image to be superimposed.
7
Touch [ON], then
.
8
Touch .
9
Press REC START/STOP to start
recording.
[M. OVRLAP] stops flashing, and
disappears when fading is finished.
Using special effects
– Digital
effect
You can add digital effects to the recordings.
[STILL]
You can record a movie while superimposing it
on a previously recorded still image.
[FLASH] (flash motion)
You can record a movie with a serial-still-image
effect (strobe effect).
[LUMI. KEY] (luminance key)
You can replace a brighter area in a previously
recorded still image, such as the background of
a person or a title written on white paper, with a
movie.
0:00:00
STBY
P-MENU
60min
FADER
BLACK
Still image
Movie
,
continued