Getting s tar ted antennas, Speakers, Power – Sony CMT-BX50BTi User Manual
Page 11: When carrying this system
CMT-BX50BTi.GB.3-293-642-12(1)
11
GB
G
etting S
tar
ted
Antennas
Find a location and an orientation that
provide good reception, and then set up
the antenna.
Keep the antennas away from the speaker
cords and the power cord to avoid
picking up noise.
Speakers
Insert only the stripped portion of the
speaker cords into the SPEAKER jacks.
Power
Connect the power cord to a wall socket.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only
for models equipped with an adaptor).
When carrying this system
1
Remove a disc to protect the CD
mechanism.
2
Press FUNCTION +/ (or FUNCTION
on the unit)
repeatedly to select
the CD function.
3
Hold down VOL +
and DSGX
on the unit, and press
on the
unit until “STANDBY” appears.
4
After “LOCK” appears, unplug the
power cord.
To use the remote
Slide and remove the battery
compartment lid
, and insert the two
supplied R6 (size AA) batteries, side
first, matching the polarities shown
below.
Notes
With normal use, the batteries should last for
about six months.
Do not mix an old battery with a new one or
mix different types of batteries.
If you do not use the remote for a long period
of time, remove the batteries to avoid damage
from battery leakage and corrosion.
To use the iPod
Insert an iPod Dock Adapter into the
unit’s connector
before use.
For details on the supplied iPod Dock
Adapters, refer to the instructions
supplied with the Dock Adapters.
To remove the iPod Dock Adapter, pull
it up with your fingernail or a flat object
using the slot inside the adapter.
Slot