Sony CMT-BX50BTi - Manual (Page 18)

CMT-BX50BTi.GB.3-293-642-11(1)
1 GB
Notes on connections with Bluetooth
devices
 If you cannot connect with a paired
Bluetooth device, perform the pairing
operation between the system and the
Bluetooth device again.
 Depending on the type of Bluetooth device,
you can adjust the volume using the controls
of the Bluetooth device.
 When BLUETOOTH   on the unit
is pressed while connected to Bluetooth
headphones, it may take some time until
a connection is made to the system from
another Bluetooth device.
 Use the A2DP-capable or A2DP- and
AVRCP-capable Bluetooth device with the
system in a peer-to-peer environment.
Tip
Bluetooth devices that have been connected
with this system in the past are registered with
this system.
When a Bluetooth connection is not
currently established, you can easily
connect the system to a Bluetooth device
by pressing BLUETOOTH   on the
unit. (Connection is attempted with up to
3 devices in order from the most recently
connected device, and the attempts end when
a connection is established.) This function may
not be available depending on the Bluetooth
device you are using.
If a connection cannot be made, the system
returns to the standby mode.
Listening to music on this
system using Bluetooth
headphones
You can listen to music played on this
system using your Bluetooth headphones
over a wireless connection.
Follow the procedure below to listen
to music on this system with Bluetooth
headphones.
Pairing this system with Bluetooth
headphones

Connecting to registered headphones

Playing music on this system
For details about the operations of the
Bluetooth headphones, also refer to the
operation manual supplied with your
Bluetooth headphones.