Sony CMT-BX50BTi - Manual (Page 31)

CMT-BX50BTi.GB.3-293-642-11(1)
1 GB
O
thers
The sound skips or fluctuates, or the
connection is lost.
 The system and the Bluetooth device
are too far apart.
 If there are obstacles between the
system and your Bluetooth device,
remove or avoid the obstacles.
 If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other Bluetooth device,
or a microwave oven nearby, move
them away.
The sound of your Bluetooth device
cannot be heard on this system.
 Turn up the volume on your Bluetooth
device first, and then adjust the volume
using VOLUME +/ (or VOL +/ on
the unit)  .
Severe hum or noise
 If there are obstacles between the
system and your Bluetooth device,
remove or avoid the obstacles.
 If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other Bluetooth device,
or a microwave oven nearby, move
them away.
 Turn down the volume of the
connected Bluetooth device.
The sound from the Bluetooth
headphones is distorted.
 Turn down the volume of the system
using VOLUME  (or VOL  on the
unit)  . If your headphones have a
volume control, also adjust the volume
using the headphone’s volume control.
 Press DSGX  on the unit repeatedly
until “DSGX OFF” appears.
 Press EQ  repeatedly to select
“BASS” or “TREBLE,” and then press
  repeatedly to turn down the
level.
iPod
There is no sound.
 Make sure the iPod is connected
securely.
 Make sure the iPod is playing music.
 Adjust the volume.
The sound is distorted.
 Turn down the volume.
 Set the “EQ” setting of the iPod to
“Off” or “Flat.”
The iPod cannot be charged.
 Make sure the iPod is connected
securely.
Continued
