Acomdata.com PDVD7 - Manual (Page 23)

Using the AC Adapter
Important Notes:
• Be sure to use the supplied AC Adapter. Use of a third-party adapter
may damage the Player and void the warranty.
• Never plug the AC Adapter in if the battery is attached and the Player is
powered on.
Connecting the AC Adapter
1. Plug the AC Adapter into a stan-
dard wall outlet.
2. Connect the other end to the AC
Adapter Jack on the Player.
3. Press the ON button on the Player
for about 2 seconds.
When the Player is powered on, the
Power Indicator will glow blue. The Player
can now be used. In the Standby mode (when
the Power Indicator glows red), the power can also
be turned on by pressing the STANDBY/POWER button
on the Remote Controller.
Disc Search or a Track Search. When
playback is stopped you can only con-
duct a Disc Search. Whether you con-
duct a Disc Search or a Track Search
you will see the Time field and a Track
field. The Time field is hi-lighted by
default.
2. If you want to input numbers into
a field other than the Time field
select the field using the CURSOR
buttons, then use the NUMBER but-
tons to input the numbers.
The first number you input will be the
leading number. For example: if you
want to specify a time of - -:26:00
(26 minutes into playback) you need
to input the numbers 2, 6, 0, 0 in
that order. To make a correction,
press the CLEAR button.
3. Press the PLAY or ENTER button.
Repeat Play
The Repeat Play function allows you to
play a title, chapter or track repeated-
ly and indefinitely.
1. Press the REPEAT button.
The screen will display the word “Off”
indicating that the Repeat Play func-
tion is currently off.
For DVDs:
While “Off” is displayed, press the
REPEAT button again to select
“Repeat Chapter”; press again for
“Repeat Title”. Press again to turn the
Repeat Play function off.
For Audio CDs:
While “Off” is displayed, press the
REPEAT button again to select
“Repeat Single”; press again to select
“Repeat All”. Press again to turn the
Repeat Play function off.
44 21