Acomdata.com PDVD7 - Manual (Page 41)

Displaying a Disc’s Menu
During Playback
For DVDs, press the MENU or TITLE
button on the Remote Controller.
During PBC playback of VCDs, press
the RETURN button.
For details, refer to the documenta-
tion included with the disc.
Removing a Disc
1. Press the STOP button.
2. Press the OPEN button to open
the tray.
3. Remove the disc.
To remove a disc, grab it by the
edges with one hand. With the other
hand, press down with your finger on
the spindle as you pull the disc away.
4. Close the tray.
Removing a Disc When
There is no Power
If there is no power to the Player, the
tray will not open. Use the Ejector
Stick to open the tray, by inserting the
stick into the Ejection Hole.
Turning off the Power
Press and hold the OFF button for
about 2 seconds. The Player will go
into Standby mode and the Power
Indicator will glow red.
The power can also be turned off by
pressing the STANDBY button on the
Remote Controller.
Using Headphones (not included)
1. Plug your headphones into the Headphones jack on the Player.
2. Before you put on your headphones, turn the Volume Control knob
(located on the left side panel of the Player) all the way down.
3. Put on the
Headphones and then
increase the volume to a
comfortable level. Be
careful not to set the vol-
ume too high when using
the Headphones.
CAUTION:
It is not recommended
that you listen to the
audio of DTS-compatible
DVDs using headphones.
26 39