Acomdata.com PDVD7 - Manual (Page 43)

Color Saturation
1. Press the LCD MODE button on the Player
three times to access the color control.
2. Use the – or + button on the Player to
adjust the color saturation setting between
levels 0 and 8.
Every time you press the – or + button, the
color saturation increases or decreases by one
level.
Reverse View
Obverse view is the default setting. When you
select reverse view the image on screen is dis-
played at 180º.
1. Press the LCD MODE button on the Player
four times to access the view mode control.
2. Use the – button on the Player to select
reverse view. Press the + button to select
obverse view.
Connecting the Battery
Pack to the Player
1. Place the Battery Pack against
the bottom of the Player as shown
so that the Guide Stems on the
Battery Pack align with the Battery
Guide Holes on the Player.
2. Tighten the Attachment Bolt
Knob until the Battery Pack is
securely attached.
If the Battery Pack is charged, the
Power Indicator on the Player will
glow red, indicating that the Player is
in Standby mode.
Removing the Battery Pack
from the Player
1. Press the OFF button to turn off
the Player.
2. Loosen the Attachment Bolt Knob
on the Battery Pack to remove.
Checking the Battery
Pack’s Power Level
With the Player powered by the
Battery Pack and the power on, press
the OSD button. The Battery Pack
power level indicator will appear on
screen.
24 41