Step 3: tv and video component hookups, Required cords, Jacks for connecting video components – Sony HT-C800DP User Manual
Page 24
HT-C800DP 4-247-292-11(1)
24
GB
Step 3: TV and Video Component Hookups
Required cords
Video cord for connecting a TV monitor (supplied)
Audio cords (not supplied)
When connecting a cord, be sure to match the color-coded pins to the appropriate jacks on the
components.
Jacks for connecting video components
Connect a
To the
TV monitor
MONITOR (VIDEO OUT) jack
VCR
VIDEO (AUDIO L/R IN/VIDEO IN) jacks
TV
TV (AUDIO L/R IN) jacks
z
Connecting the system to a TV (for the customers in Europe only)
Connect the system to your TV using the SCART adapter.
z
When using the COMPONENT VIDEO OUT jacks (Y, P
B
/C
B,
P
R
/C
R
) instead of the VIDEO jacks
Your TV monitor must also be connected via COMPONENT VIDEO OUT jacks (Y, P
B
/C
B
, P
R
/C
R
). If your TV
accept progressive format signals, you must use this connection and set “COMPONENT OUT” to “PROGRESSIVE”
in “SCREEN SETUP” (page 66).
Notes
• When the mode of the system is not set to “DVD”, no signal is output from the COMPONENT VIDEO OUT
jacks.
• When the mode of the system is set to “DVD” and “INTERLACE” is selected in “SCREEN SETUP”, the signal
is output from the MONITOR and COMPONENT VIDEO OUT jacks.
• When the mode of the system is set to “DVD” and “PROGRESSIVE” is selected in “SCREEN SETUP”, the
signal is output only from the COMPONENT VIDEO OUT jacks.
Red (R/audio)
White (L/audio)
Red (R/audio)
White (L/audio)
Yellow
Yellow