Sony HT-C800DP - Manual (Page 70)

HT-C800DP 4-247-292-11(1)
70 GB
Adjusting the speaker volume and
level
1
After you stop playback, select
“SPEAKER SETUP” after pressing DVD
SETUP in the Setup Display.
2
Select “TEST TONE” and set “TEST
TONE” to “ON”.
You will hear the test tone from each
speaker in sequence.
3
From your listening position, select
“BALANCE” or “LEVEL” and adjust the
value of “BALANCE” and “LEVEL” using
X/x.
When you select “BALANCE”, the test
tone is emitted from both left and right
speakers simultaneously.
4
Select “TEST TONE” and set “TEST
TONE” to “OFF” to turn off the test
tone.
Note
When you adjust the speaker settings, the sound cuts
off for a moment.
OFF The test tone is not emitted from the
speakers.
ON The test tone is emitted from each
speaker in sequence while adjusting
balance or level.
When you select “BALANCE”, the
test tone is emitted from both left
and right speakers simultaneously.
x BALANCE
You can vary the balance of the left and right
speakers as follows. Be sure to set “TEST
TONE” to “ON” for easy adjustment.
The default settings are underlined.
To adjust the volume of all the
speakers at one time
Use the MASTER VOLUME control on the
system or press VOLUME +/–.
x TEST TONE
The speakers will emit a test tone to adjust
“LEVEL” and “BALANCE”.
The default settings are underlined.
FRONT Adjust the balance between the
CENTER front left and right speakers (You
can adjust from center 6 steps left
or right).