Advantech RUGGED PENTIUM IPPC-9120 - Manual (Page 131)

116 IPPC-9120/9150 Series User's Manual
PM Control by APM
The option "No" allows the BIOS to ignore the APM (Advanced
Power Management) specification. Selecting "Yes" will allow the
BIOS to wait for APM's prompt before it enters Doze mode, Standby
mode, or Suspend mode. If the APM is installed, it will prompt the
BIOS to set the system into power saving mode after all tasks are
done.
The options are: Yes (Default), No.
Video Off Option
This feature provides the selections for the video display power saving
mode. The option "Susp, Stby
→ Off" allows the video display to go
blank if the system enters Suspend or Standby mode. The option
"Suspend
→ Off" allows the video display to go blank if the system
enters Suspend mode. The option "All Modes → Off" allows the
video display to go blank if the system enters Doze mode or Suspend
mode. The option "Always On" allows the video display to stay in
Standby mode even when the system enters Doze or Suspend mode.
The options are: Susp, Stby → Off (Default), Suspend → Off,
All Modes → Off, Always On.
Video Off Method
"DPMS Supported" allows the BIOS to blank off the screen display
with your VGA card which supports DPMS (Display Power Manage-
ment Signaling function). "Blank Screen" allows the BIOS to blank
the screen display by turning off the red-green-blue signals.
The options are: DPMS Supported (Default), Blank Screen.
MODEM Use IRQ
This feature allows you to select the IRQ# to meet your modem's
IRQ#.
The options are: 3 (Default), 4, 5, 7, 9, 10, 11, NA.
Doze Mode
The system will not enter Doze mode, because this option is designat-
ed as "Disabled".