Advantech RUGGED PENTIUM IPPC-9120 - Manual (Page 134)

Chapter 9 Award BIOS Setup 119
Reset Configuration Data
When enabled, this feature allows the system to clear the last BIOS
configuration data and then reset the data with the default BIOS
configuration data.
The options are: Disabled (Default), Enabled.
Used MEM base addr
Choose and use the MEM base address.
The options are: N/A (Default), C800 ~ DC00.
Assign IRQ for USB
Assigns an IRQ for the USB.
The options are: Disabled (Default), Enabled.
9.8 Load BIOS Defaults
Figure 9-7: Load BIOS defaults screen
The BIOS defaults screen contains the most appropriate values of the
system parameters that allow minimum system performance.