12 ide hdd auto detection – Advantech RUGGED PENTIUM IPPC-9120 User Manual

Page 138

Advertising
background image

Chapter 9 Award BIOS Setup

123

CMOS Setup utility. If "System" is selected and User Password is
enabled, you will be requested to enter the user password every time
you reboot the system. If "Setup" is selected under the Security
Option field and User Password is enabled, you will be prompted only
when you reboot the system.

9.12 IDE HDD Auto Detection

Figure 9-9: IDE HDD auto detection screen

The IDE Hard Disk Drive Auto Detection feature automatically
configures your new hard disk. Use it for quick configuration of new
hard disk drives. This feature allows you to set the parameters of up to
four IDE HDDs. The option with "(Y)" is recommended by the system
BIOS. You may also key in your own parameters instead of setting
them
according to the system BIOS. After keying in all settings, press "Esc"
to return to the main menu. For confirmation, enter the Standard CMOS
Setup feature.

Advertising
This manual is related to the following products: