Sony NEX-VG10 - Manual (Page 49)

Menu list (continued)
50 US
Setup
Allows you to make more detailed shooting settings, or change the camcorder settings.
Shooting Settings
* Still image only
Main Settings
Memory Card Tool
* Still image only
Movie Audio Rec Sets whether or not to record the sound for movie recording. (On/Off)
Grid Line Turns on the grid line that helps you to adjust the composition of images.
(On/Off)
Shoot w/o Lens Sets whether or not to record images when there is no lens. (Enable/Disable)
Red Eye Reduction* When using a flash (sold separately), prevents eyes from being shot in red.
(On/Off)
Auto Review* Shows the image right after shooting. (2 Sec/Off)
Volume Settings Sets the sound volume of movies.
Beep Sets the sound produced when you operate the camcorder. (On/Off)
Language Selects the language used on the screen.
Date/Time Setup Sets the date and time. (year-month-day/Date Format/Daylight Svg.)
Area Setting Selects the area where you are using the camcorder.
Power Save Turns the camcorder to the power save mode. (5 Min/Off)
LCD Brightness Sets the brightness of the LCD monitor. (–2 to +2)
Viewfinder Bright. Sets the brightness of the viewfinder. (–1 to +1)
Cleaning Mode Allows you to clean the image sensor.
Version Displays the version of the camcorder and the lens.
Demo Mode Sets whether or not to use the recorded movie for the demonstration.
(On/Off)
Reset Default Resets the camcorder to the factory-settings.
Format Formats the memory card.
Recover Image DB Repairs the image database file of movies when inconsistencies are found.
File Number* Selects the method used for assigning file numbers to images. (Series/
Reset)