Sony DCR-DVD205 User Manual

Page 128

Advertising
background image

128

E

(Battery level warning)

Slow flashing

• The battery pack is nearly used up.
• Depending on the operating

environment or battery conditions, E
may flash, even if there are
approximately 20 minutes remaining.

%

(Moisture condensation warning)*

Fast flashing

• Moisture condensation has occurred

with the disc. Turn off your camcorder
and leave it for about 1 hour (p.139).

(High temperature warning)

Slow flashing

• The temperature of your camcorder is

getting higher.

Fast flashing

• The temperature of your camcorder is

extremely high.* Turn off your
camcorder and leave it for a while in a
cool place.

(Warning indicator pertaining to

“Memory Stick Duo”)

• “Memory Stick Duo” is not inserted

(p.31).

(Warning indicators pertaining to

“Memory Stick Duo”)*

• The “Memory Stick Duo” is damaged.
• The “Memory Stick Duo” is not

formatted correctly (p.80, 135).

(Warning indicator pertaining to

incompatible “Memory Stick Duo”)*

• An incompatible “Memory Stick Duo”

is inserted (p.135).

-

(Warning indicator pertaining

to the write-protect of the “Memory
Stick Duo”)*

• The write-protect tab on the “Memory

Stick Duo” is set to lock (p.135).

(Warning indicator pertaining to the

flash)*

Slow flashing

• Still charging.

Fast flashing

• There is something wrong with the flash.

(Warning indicator pertaining to

camera-shake warning)

• The amount of lights is not sufficient, so

camera-shake easily occurs. Use the
flash.

• The camcorder is unsteady, so camera-

shake easily occurs. Hold the camcorder
steady with both hands and shoot the
image. However, note that the camera-
shake warning indicator does not
disappear.

* You hear a melody when the warning indicators

appear on the screen (p.83).

If messages appear on the screen, follow the
instructions.

x

Battery

Use the “InfoLITHIUM” battery pack.
(p.137)

Battery level is low. (p.21, 137)

Old Battery. Use a new one. (p.137)

x

Drive

Z Drive error. Turn on power again.

• A problem may have occurred with the

disc drive. Turn off and then on again.

Description of warning
messages

Warning indicators and messages (continued)

Advertising
This manual is related to the following products: