Sony DCR-DVD205 - Manual (Page 83)

83
Usi
n
g t
h
e S
e
tu
p i
tem
s
You can select the number of thumbnails that
appear on the VISUAL INDEX screen.
Thumbnail Glossary
(p.147)
B ZOOM LINK
Change the number of thumbnails (6 or 12)
with the zoom lever on your camcorder.*
6IMAGES
Displays thumbnails of 6 images.
12IMAGES
Displays thumbnails of 12 images.
* You can operate with the zoom buttons on the
LCD frame or on the Remote Commander
(For DCR-DVD305/DVD755).
Because the default setting is [ON], when
you select
tab on the VISUAL INDEX
screen the first 5 seconds of each movie
displayed on the screen are played back in
sequence.
• Set to [OFF] to conserve battery power.
• Playback for the movie stops after repeating 5
times.
B AUTO
Displays the remaining disc indicator for
about 8 seconds in situations such as those
described below.
– When your camcorder recognizes the
remaining disc capacity with the POWER
switch set to
(Movie).
– When you press DISP/BATT INFO to
switch the indicator from off to on with
the POWER switch to
(Movie).
– When the recordable time for movies is
less than 5 minutes.
– When you start recording from the line
input (For DCR-DVD305/DVD755).
ON
Always displays the remaining disc
indicator.
The default setting is [ON] so that you can
use the supplied Remote Commander (p.53).
• Set to [OFF] to prevent your camcorder from
responding to a command sent by other device’s
remote control.
• The setting returns to [ON] when you set the
POWER switch to OFF (CHG) for more than 12
hours.
B ON
A melody sounds when you start/stop
recording, or operate the touch panel.
OFF
Cancels the melody.
B LCD PANEL
Shows displays such as the counter on the
LCD screen and in the viewfinder.
V-OUT/PANEL
Shows the display also on the TV screen.
B NORMAL
Scrolls the setup items downwards by
touching .
OPPOSITE
Scrolls the setup items upwards by touching
.
DISPLAY
MOVIE PB
REMAINING
REMOTE CTRL (Remote control)
(DCR-DVD305/DVD755)
BEEP
DISP OUTPUT
SETUP ROTATE