Position information (dsc-hx100v only) – Sony DSC-HX100V User Manual
Page 161
Top page > Using MENU items (Shooting) > MENU items (Shooting) > Position Information
(DSC-HX100V only)
Position Information (DSC-HX100V only)
The GPS triangulating status can be checked. Set the camera to triangulate when the position
information is being displayed.
1. MENU
(Position Information)
on the control button
The position information is displayed on your camera.
GPS indicators
The indicator (A) changes according to the strength of GPS signal reception when GPS is
activated.
GPS
indicators
Triangulating
status
GPS reception status
No indicator Off
[GPS setting] is set to [Off] or an error occurred.
Difficult
Your camera cannot find a GPS signal, therefore, it cannot
acquire the location information. Use your camera in an open
area.
Searching
Searching for GPS satellites. It may take several minutes to
start triangulating.
Triangulating
Your camera is receiving a GPS signal, and can acquire
location information. Latitude and longitude (B) are displayed
when triangulating.
Satellite and triangulating indicators
The satellite’s position can be checked on the position information display (C). The satellite
information acquisition status is displayed on the triangulating indicator (D). The triangulating
indicator turns green when triangulation is successfully completed.
Notes
Even when the camera acquires information from satellites, triangulation may take time or
fail according to the time or place.
Do not cover the GPS sensor with your finger when searching for GPS satellites or when
triangulating. This decreases the sensitivity of the GPS sensor and triangulation may fail.
161