Sony DSC-HX100V - Manual (Page 88)

When the focus mode is set to other than [Multi AF], you cannot use the Face Detection
function.
If Tracking focus is activated, the camera focuses with priority on the subject to be tracked.
You may not be able to set some functions depending on the selected REC mode. For
details, see “Functions not available in some REC modes.”
[Details]
Using Flexible Spot AF
This is useful when you shoot using a tripod and the subject not in the center of the frame.
1. Press the control button to adjust the position of the AF range finder frame (A) where you
want to focus, then press .
The color of the range finder frame changes from yellow to white.
To reset the setting, press
in the center again. You can adjust the rough position by
using the jog dial.
Note
Once you change the focus method, the AF range finder frame you set up is cleared.
Related Topic
Tracking focus
Back to top
Copyright 2011 Sony Corporation
88