Sony DVP-CX850D - Manual (Page 39)

39
Using V
arious Functions with the Contr
ol Menu
Displaying the audio information of the
disc
When you select “AUDIO,” the playing channels are
displayed on the screen.
In Dolby Digital format, the signals from monaural to 5.1
channels can be recorded on a DVD. Depending on the
DVD the number of the recorded channels may be
different.
* “PCM,“ “DTS” or “DOLBY DIGITAL” is displayed. In
“DOLBY DIGITAL” case, the channels in the playing
track are displayed by number as follows:
The case of Dolby Digital 5.1 ch:
** The letters in the program format display mean the
following:
L: Front (L)
R: Front (R)
C: Center (monaural)
LS: Rear (L)
RS: Rear (R)
S: Rear (monaural) – the rear component of the
Dolby Surround processed stereo signal and the
Dolby Digital signal.
LFE: LFE (Low Frequency Effects)
Front component 2
+ Center component 1
Rear component 2
LFE (Low
Frequency Effect)
component 1
Current
audio
format*
Current
playing
program
format**
DOLBY DIGITAL 3 / 2. 1
1 8 ( 3 4 )
1 2 ( 2 7 )
1 2 3 ALL
C 0 1 : 3 2 : 5 5
DVD
PLAY
L
DOLBY DIGITAL 3/2.1
R
LS RS
C
PROGRAM FORMAT
LFE
To select, press , then . ENTER
1: ENGLISH
The display examples are as follows:
•PCM (stereo)
•Dolby Surround
•Dolby Digital 5.1ch
•DTS
z
You can find Dolby Surround-encoded software by looking at
the packaging
Use discs with the logo. In order to enjoy Dolby Digital
playback you must use discs bearing this logo.
L R
1: ENGLISH
PCM 48kHz 24bits
PROGRAM FORMAT
To select, press , then . ENTER
C 0 3 5 5
1: ENGLISH
DOLBY SURROUND
DOLBY DIGITAL 2/0
L R C
S
PROGRAM FORMAT
To select, press , then . ENTER
1: ENGLISH
L R C
DTS 3/2.1
PROGRAM FORMAT
LFE
LS RS
To select, press , then . ENTER
1: ENGLISH
L R C
DOLBY DIGITAL 3/2.1
PROGRAM FORMAT
LFE
LS RS
To select, press , then . ENTER