Sony DVP-CX850D - Manual (Page 9)

9
Getting Started
If you connect the player to a monitor or
projector having component video input
connectors that conform to output signals from
the COMPONENT VIDEO OUTPUT (Y, P
B /B-Y, P R /R-Y)
connectors on the player
Connect the component via the COMPONENT VIDEO
OUTPUT connectors using three video connecting cords
(not supplied) of the same kind. You will get a better
picture.
Notes
• Refer to the instructions supplied with the component to be
connected.
• Do not connect this player to a video deck. If you view the
pictures on your TV after making the connections shown
below, a picture noise may appear.
• Depending on the TV or receiver (amplifier), sound distortion
may occur because the audio output level is high. In this case,
set “AUDIO ATT” in “AUDIO SETUP” to “ON” in the setup
display. For details, see page 63.
Connect
directly.
VCR TV
CD/DVD
player
Y
P B
Y
P B /
B–Y
P R /
R–Y
COMPONENT VIDEO
OUTPUT
P R
COMPONENT
VIDEO IN
Setups for the player
Some setups are necessary for the player depending on
the TV or other components to be connected.
Use the setup display to change the various settings.
For details on using the setup display, see page 55.
• To connect the player to a normal TV
In the setup display, set “TV TYPE” in “SCREEN
SETUP” to “4:3 LETTER BOX” (default setting) or “4:3
PAN SCAN.” For details, see page 59.
• To connect the player to a TV having the WIDE
MODE function
In the setup display, set “TV TYPE” in “SCREEN
SETUP” to “16:9/4:3 WIDE MODE.” For details, see
page 59.
• To connect the player to a wide-scr een TV
In the setup display, set “TV TYPE” in “SCREEN
SETUP” to “16:9/4:3 WIDE MODE.” For details, see
page 59.