Turning the power on, You can turn on the speaker, Help guide – Sony SRS-X7 User Manual

Page 128

Advertising

Personal Audio System

SRS-X7

Turning the power on

1. Press the

(on/standby) button.

The

(on/standby) indicator lights up in green.

Hint

The LINK indicator also begins to flash when the speaker is turned on. You can set up or use the network function

when it stops flashing.

When you turn on the speaker in the BLUETOOTH/Network standby mode, the start-up time becomes shorter and the

speaker will become operational sooner, than when you turn on the speaker in standby mode. To turn on the

BLUETOOTH/Network standby function, with the speaker turned on, press and hold the

(on/standby) button

until the

(on/standby) indicator lights up in orange.

Note

When the CHARGE indicator flashes slowly, the battery is running low and needs to be charged by connecting an AC

outlet via the AC adaptor.

If the CHARGE indicator flashes 3 times and goes off when you turn on the speaker, the battery is empty and needs

to be charged by connecting an AC outlet via the AC adaptor.