Using the bluetooth/network standby function, Help guide – Sony SRS-X7 User Manual

Page 130

Advertising

Personal Audio System

SRS-X7

Using the BLUETOOTH/Network standby function

If the BLUETOOTH/Network standby function is on, the speaker turns on automatically by operating a BLUETOOTH

device or network device, and BLUETOOTH or network connection starts.

The BLUETOOTH/Network standby function can be set only when the speaker is connected to an AC outlet via the AC

adaptor.

When you turn on the speaker in the BLUETOOTH/Network standby mode, the start-up time becomes shorter and the

speaker will become operational sooner, than when you turn on the speaker in standby mode.

1. Connect the speaker to the AC outlet.

2. Turn on the speaker.

The

(on/standby) indicator lights up in green.

3. Press and hold the

(on/standby) button until the

(on/standby) indicator lights up in orange.

The speaker turns off and enters the BLUETOOTH/Network standby mode.

If you operate a BLUETOOTH device or network device, the speaker turns on automatically and connection starts.

To turn off the BLUETOOTH/Network standby function

With the speaker turned on, press and hold the

button.

When the

(on/standby) indicator turns off, the BLUETOOTH/Network standby function is turned off and the

speaker enters the standby mode.

Note

The BLUETOOTH/Network standby function can be set only when the speaker is connected to an AC outlet via the

AC adaptor. When the speaker is being powered by the built-in battery only, the BLUETOOTH/Network standby

function is not available.