Sony PCG-V505EC - Manual (Page 139)

7. Touch a metal object (such as the connector panel on the back of your computer) to discharge static electricity.
Avoid touching any part of the motherboard or other components inside the computer.
8. Remove the memory module by pulling out the tabs (see arrows No. 1).
9. Pull out the module in the direction of arrow No. 2. See To install a memory module for more information.
Rem ov ing a Mem ory Module
To install a memory module
1. Remove the new memory module from its packaging, and install the memory module by sliding it into the open
slot at a 45-degree angle. See
To remove a memory module.
Installing a New Mem ory Module
2. Push the module down until it snaps into place.
3. When the module is correctly seated, gently flip the keyboard back over the computer, making sure the keyboard
is also correctly seated.
4. Replace the fastening screw on the bottom of the computer until securely in place. Do not over tighten the
screw.
5. Make sure the system recognizes the new memory module. See Confirming added memory capacity for more Page 139