Sony PCV-J100 - Manual (Page 44)

VAIO® Reference Manual 30
8 If necessary, remove any add-in cards (see “Removing an Add-in
Card” on page 27) to gain access to the battery. You may also need to
disconnect some cables.
9
Use your finger or a small flathead screwdriver push in on the small
tab inside the battery holder to pop out the battery.
10
Lift out the battery and dispose of it according to the instructions that
came with the new battery.
11
Insert the new battery into the battery holder, with the plus (+) side
up, and gently press down until the battery snaps into place.
12 Replace any add-in cards that were removed.
13 Reconnect any cables that were disconnected.
14 Replace the side panel (see “Replacing the Side Panel” on page 25).
15
Reconnect the power cord and turn on the computer.
!
Touch any exposed metal part of chassis to discharge static electricity in
your body before handling an add-in card or other sensitive electronic
component.
✍
The Sony CR2032 battery is recommended. Using a type of battery other than a
CR2032 may present a risk of fire or explosion.
KY0072.VSD