Sony PCV-J100 - Manual (Page 50)

VAIO® Reference Manual 36
Removing a Memory Module
You may need to remove a memory module if you change the memory
configuration or replace a bad module.
1 Remove the front cover (see “Removing the Side Panel” on page 22).
2
Remove the left side cover (see xref).
3
Remove the screw that secures the diskette drive to the chassis and
slide the diskette drive out about two inches (the attached cables limit
this distance).
!
Before opening the system unit, save any open files, exit the Windows
®
operating system, turn off the power of the computer and all attached
peripherals, and then unplug the power cord.
VOY001.VSD
1