Sony DCR-PC55 - Manual (Page 10)

10
DCR-PC55 2-548-724-11(1)
Step 2: Charging the battery pack
You can charge the “InfoLITHIUM”
battery pack (A series) (p. 102) after
attaching it to your camcorder.
• Only the “InfoLITHIUM” battery pack (NP-
FA50) can be used.
POWER switch
DC IN jack
Handycam
Station
DC plug
Power cord
AC Adaptor
To the wall outlet
1
Slide the battery cover in the
direction of the arrow to open it.
2
Insert the battery pack, aligning
the top of the  mark on the side
with the top of the  mark on
your camcorder until it clicks.
3
Close the battery cover.
Be sure to close the cover completely.
4
Slide the POWER switch up to
OFF (CHG). (The default setting.)
5
Connect the AC Adaptor to the
DC IN jack on the Handycam
Station.
With the 
mark facing up
DC IN jack
6
Connect the power cord to the AC
Adaptor and the wall outlet.