Sony DCR-PC55 - Manual (Page 78)

78
DCR-PC55 2-548-724-11(1)
Troubleshooting
If you run into any problems using your camcorder, use the following table to troubleshoot
the problem. If the problem persists, remove the power source and contact your Sony dealer.
Overall operations/Easy Handycam
The power does not turn on.
• The battery pack is discharged, running low, or not attached to the camcorder.
• Attach a charged battery pack to the camcorder (p. 10).
• Use the AC Adaptor to connect to a wall outlet (p. 10).
• Insert your camcorder into the Handycam Station correctly (p. 10).
The camcorder does not operate even when the power is set to on.
• Disconnect the AC Adaptor from the wall outlet or remove the battery pack, then reconnect it
after about 1 minute. If the functions still do not work, press the RESET button (p. 26) using
a sharp-pointed object. (If you press the RESET button, all settings, including the clock
setting, are reset, except the Personal Menu items.)
Buttons do not work.
• During Easy Handycam operation, the available buttons are limited (p. 20).
You cannot turn Easy Handycam operation on or off.
• During recording or communicating with another device via USB cable, you cannot turn
Easy Handycam operation on or off.
Settings change during Easy Handycam operation.
• During Easy Handycam operation, the settings of the functions that are not displayed on the
screen return to their defaults. Previously made settings are restored when you cancel the
Easy Handycam operation.
[DEMO MODE] does not start.
• Eject the cassette and “Memory Stick Duo” from your camcorder (p. 18).
The camcorder gets warm.
• This is because the power has been turned on for a long time. This is not a malfunction.
You cannot attach the camcorder to the Handycam Station.
• The Wrist strap is caught between the camcorder and the Handycam Station (p. 11).
• Make sure that the shoe cover is properly closed or open (p. 65).