Step 4: adjusting the lcd panel, The lcd panel – Sony DCR-PC55 User Manual

Page 15

Advertising
background image

15

Getting Started

DCR-PC55 2-548-724-11(1)

Step 4: Adjusting the LCD panel

The LCD panel

Open the LCD panel 90 degrees to the
camcorder (

), then rotate it to the best

angle to record or play (

).

2

1

180 degrees

(max.)

90 degrees (max.)

DISP/BATT INFO

90 Degrees to the

camcorder

• Do not press the buttons on the LCD frame

accidentally when you open or adjust the LCD
panel.

• If you rotate the LCD panel 180 degrees to the

lens side, you can close the LCD panel with
the LCD screen facing out. This is convenient
during playback operations.

To darken the LCD screen

Press and hold DISP/BATT INFO for a few
seconds until

appears.

This setting is practical when you use
your camcorder in bright conditions or
where you want to save battery power. The
recorded picture will not be affected by
the setting. To turn on the LCD backlight,
press and hold DISP/BATT INFO for a few
seconds until

disappears.

• See [LCD BRIGHT] (p. 50) to adjust the

brightness of the LCD screen.

Advertising