Sony HT-DDW900 - Manual (Page 52)

52 US
E:\SEM_soowan(film)\J9050000_2662263112DDW900_US\2662263112\US05AMP_HT-
DDW900-U.fm masterpage: Left
HT-DDW900
2-662-263-11 (2)
Resetting sound fields to
the initial settings
Be sure to use the buttons on the receiver for
this operation.
1
Press ?/1 to turn off the power.
2
While holding down 2CH, press
?/1.
“S.F. CLR.” appears on the display and all
sound fields are reset to their initial
setting.
Listening to FM/AM radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas to the receiver (page 27).
Tip
The tuning scale for direct tuning differs depending
on the area code as shown in the following table. For
details on area codes, see page 3.
* The AM tuning scale can be changed (page 71).
?/1
AUTO CAL MIC
SPEAKERS (OFF/A/B/A+B)
PHONES VIDEO 3 IN/PORTABLE AV IN
VIDEO L AUDIO R
MEMORY/ ENTER TUNING MODE TUNING 2CH A.F.D. MOVIE MUSIC MULTI CH IN MUTING
DISPLAY INPUT MODE
INPUT SELECTOR
MASTER VOLUME
1,2
2
Tuner Operations
Area code FM AM
U, CA 100 kHz 10 kHz*
US01COV_HT-DDW900-U.book Page 52 Thursday, December 15, 2005 4:08 PM