Sony ERS-7M3 - Manual (Page 143)

Ad
di
ti
on
al
I
n
fo
rma
ti
o
n
143
• If you will not use the AIBO
®
Entertainment Robot for an extended period, such as a
vacation, remove the battery pack from it.
• Do not expose the AIBO robot to strong magnetic fields or X-rays.
• Use only the AIBO-ware “AIBO MIND 3” for the AIBO robot ERS-7M3. To verify
whether your version of AIBO-ware is compatible with your AIBO robot model, refer to
the AIBO-ware “Memory Stick™” media label.
• The supplied battery is designed only for use with the AIBO ERS-7 series and 300 series.
• Use only the supplied battery or the specified replacement battery ERA-7B2 (option). If
any other battery is used, correct operation is not assured.
Condensation
When the AIBO robot is brought from a cold to a warm location, moisture may form on its
surface and on the inside. If the AIBO robot is used in this condition, damage may occur.
Leave the AIBO robot in the new location for about an hour without starting it up, until the
moisture has evaporated.
“Memory Stick” media handling
To protect the saved data on the “Memory Stick” media, note the following:
• The AIBO MIND 3 software “Memory Stick” media is designed only for use with the
AIBO robot ERS-7 series. It cannot be used with any other version of the AIBO robot.
• Do not use the AIBO-ware “Memory Stick” media to save data on PCs or camcorders, or
for any purpose other than for the AIBO robot. Doing so may result in damage to the
AIBO robot.
• Do not touch the terminal A with your hand or metal objects.
• If the “Memory Stick” media is used in a location subject to
static electricity or electric noise, data may be lost or corrupted.
• Do not attach anything other than the dedicated label in the areas
indicated by B.
• A label has already been attached to the AIBO-ware “Memory
Stick” media at the factory.
• Do not bend or drop the “Memory Stick” media or subject it to
strong shock.
• Do not attempt to disassemble or modify the “Memory Stick”
media.
• To remove the “Memory Stick” media from the AIBO robot while it is still operating, first
press the pause button to stop the AIBO robot’s movements.
• Keep the “Memory Stick” media away from water and other liquids.
• Do not use or store the “Memory Stick” media in places subject to:
−
Excessively high temperatures, such as in a car parked in the sun,
−
Direct sunlight, or
−
High humidity or corrosive gas.