Sony ERS-7M3 - Manual (Page 27)

In
tr
od
uc
tio
n
27
A
Paw sensors
These are located on the bottom of the
AIBO
®
Entertainment Robot’s paws, and
detect contact with any surface it touches.
When the AIBO robot extends one of its
paws, it will react with happiness if you
touch it.
B
Speaker
Emits music, sound effects, and voice
guide.
C
Charging terminal
When you place the AIBO robot on the
Energy Station, this part makes contact
with the station to allow charging of the
AIBO robot’s battery.
D Volume control switch (VOLUME)
Adjusts the volume of the speaker to one
of four levels (including no sound).
E
Wireless LAN switch (WIRELESS)
This turns the AIBO robot’s wireless LAN
function ON or OFF.
F
“Memory Stick™” media access
indicator
This indicator turns red while the AIBO
robot is reading or writing to a “Memory
Stick” media. While the indicator is ON,
you cannot remove the “Memory Stick”
media or battery by means of the
“Memory Stick” media eject button (Z) or
the battery latch (Z). Under this
circumstance, never attempt to forcibly
remove the “Memory Stick” media.
G
Battery pack latch (BATT Z )
Flip this latch to the rear when you want to
remove the battery.
H
Chin sensor
Senses when you touch the AIBO robot’s
chin.
I
FCC ID/MAC address label
Indicates the FCC ID and MAC address of
the AIBO robot’s wireless unit.
J Battery slot
Holds the AIBO robot’s lithium-ion battery.
K
“Memory Stick” media eject button
( Z )
Press to eject the “Memory Stick” media.
L
“Memory Stick” media slot
This is where you insert the provided
AIBO-ware “Memory Stick” media.
* Emergency eject hole
If you experience difficulties ejecting the
“Memory Stick” media or battery because
of a malfunction or operation problems,
place the AIBO robot in Pause mode, and
then insert an object such as a paper clip
into the emergency eject hole.
(Do not use fragile objects, such as
toothpicks, into the emergency eject hole as
they may break.)
Under normal circumstances, you do not
need to use the emergency eject hole.