Sony HDR-CX700V - Manual (Page 103)

10
Table of C
on
ten
ts
Enjo
y U
seful F
unc
tions
Inde
x
US
Photos cannot be played back.
Photos cannot be played back if you have
modified files or folders, or have edited the
data on a computer. (The file name flashes in
that case.) This is not a malfunction.
is indicated on a thumbnail.
This may appear on an image recorded on
other devices, edited on a computer, etc.
You removed the AC Adaptor or the battery
pack while the recording media icon at the top
right corner of the screen flashes, or before
the access lamp is turned off after recording.
This may damage your image data and is
displayed.
is indicated on a thumbnail.
The image data base file may be damaged.
Check the data base file by touching
(MENU)  [Setup]  [ (Media Settings)]
 [Repair Img. DB F.]  the recording
medium. If it still appears, delete the image
with (p. 50).
No sound or only a quiet sound is heard
during playback.
Turn up the volume (p. 31).
When you record sound with [Micref Level]
(p. 84) set to [Low], the recorded sound may
be difficult to hear.
Sounds cannot be recorded while shooting
with [Smth Slw REC] or [Golf Shot].
Left and right sound will be heard
unbalanced when playing back movies on
computers or other devices.
Change the sound conversion type (downmix
type) when playing back on 2ch stereo devices.
Refer to the instruction manual supplied with
your playback device for details.
Change the sound to 2ch when creating a disc
using the supplied software “PMB.”









This happens when sound recorded in 5.1ch
surround is converted to 2ch (normal stereo
sound) by a computer or other device. This is
not a malfunction.
Record sound with [Audio Mode] set to [2ch
Stereo] (p. 84).
The demonstration movies cannot be
played.
Select the internal recording media for the
recording media, and the high definition
image quality (HD).
The demonstration movie was deleted.
A movie is played back automatically.
Movies play automatically as a demonstration
movie when the filmed movie fulfills a certain
condition on your camcorder (p. 96). This is
not a malfunction.
Playing back images stored on
memory card on other devices
Images cannot be played back or the
memory card is not recognized.
The playback device does not support playing
back memory cards (p. 4).
Editing movies/photos on your
camcorder
Unable to edit.
Unable to edit because of the condition of the
image.
A movie cannot be divided.
A movie that is too short cannot be divided.
A protected movie cannot be divided.








