Usb lun setting, Disc burn, Beep – Sony HDR-CX700V User Manual

Page 94: Lcd brightness, Rec lamp (recording lamp)

Advertising
background image



Table of C

on

ten

ts

Enjo

y U
seful F

unc
tions

Inde
x

US

USB LUN Setting

Improves compatibility with external

devices by limiting the functions of the USB

connection.

 Multi

Use this setting for ordinary operations.

Single

Try this setting only if you cannot connect to

an external device.

Notes

When you use “PMB Portable” to upload

images to a service on the Internet, make sure

to set [USB LUN Setting] to [Multi].

Disc Burn

See page 57.

Beep

 On

A melody sounds when you start/stop

recording, or operate the touch panel.

Off

Cancels the melody.

LCD Brightness

You can adjust the brightness of the LCD

screen.

 Normal

Normal setting (normal brightness).

Bright

Select this when the LCD screen is not bright

enough.

Tips

This adjustment does not affect the recorded

images in any way.

Your Location (HDR-CX560V/
CX700V)

See page 49.

GPS Setting (HDR-CX560V/
CX700V)

You can select whether the camcorder

receives or does not receive GPS signals

(p. 47).

 On

Receives GPS signals.

Off

Does not receive GPS signals.

Notes

If you set [GPS Setting] to [Off], the location

information that has previously been recorded

will be invalid. The location information will

not be recorded until triangulating is finished

successfully after you switch the [GPS Setting]

to [On].

REC Lamp (Recording lamp)

You can make the camera recording lamp

on the front of your camcorder not to turn

on.

 On

The camera recording lamp lights up.

Off

The camera recording lamp does not light up.

Advertising
This manual is related to the following products: