83). w, E 83). a, Smile shutter – Sony HDR-CX700V User Manual

Page 83: Smile sensitivity, Flash, Flash level

Advertising
background image



Table of C

on

ten

ts

Enjo

y U
seful F

unc
tions

Inde
x

US

Smile Shutter

The shutter is released when the camcorder

detects a smile.

 Dual Capture

Only during movie recording, the shutter is

released automatically, when the camcorder

detects a smile.

Always On

The shutter is released when the camcorder

detects a smile whenever the camcorder is in

recording mode.

Off (

)

Smiles are not detected, so photos are not

recorded automatically.

Notes

Smiles may not be detected depending on

recording conditions, subject conditions, and

the setting of your camcorder.

Smile Sensitivity

Sets the smile detection sensitivity for using

the Smile Shutter function.

Slight Smile

Detects even a slight smile.

 Normal Smile

Detects a normal smile.

Big Smile

Detects a big smile.

Flash

You can select the flash setting when you

record photos using the built-in flash, or

an external flash (sold separately) that is

compatible with your camcorder.

 Auto

Automatically flashes when there is

insufficient ambient light.

On ( )

Always uses the flash regardless of the

surrounding brightness.

Off ( )

Records without flash.

Notes

The recommended distance to the subject when

using the built-in flash is approximately 0.3 m

to 1.5 m (1 foot to 5 feet).

Remove any dust from the surface of the flash

before using it. Flash effect may be impaired if

heat discoloration or dust obscures the lamp.

The /CHG (flash/charge) lamp (p. 14) flickers

while charging the flash, and remains lit when

the battery charge is complete.

If you use the flash in bright places such as

when shooting a backlit subject, the flash may

not be effective.

When [Conversion Lens] (p. 81) is set to other

than [Off], the built-in flash does not flash,and

also you cannot set [Flash].

The flash does not flash in movie recording

mode.

A shadow may be produced on photos if you

use the flash when you take photos with the

conversion lens (sold separately) attached.

Flash Level

You can set this function when you

record photos using the built-in flash, or

an external flash (sold separately) that is

compatible with your camcorder.

High ( )

Makes the flash level higher.

 Normal ( )

Low ( )

Makes the flash level lower.

Advertising
This manual is related to the following products: