Sony HDR-CX700V - Manual (Page 121)

11
Table of C
on
ten
ts
Enjo
y U
seful F
unc
tions
Inde
x
US
Bottom
Indicator Meaning
View Images button (29)
Micref Level low (84)
Wind Noise Reduct. (84)
Blt-in Zoom Mic (84)
Audio Mode (84)
Audio Level Display (86)
Low Lux (79)
Spot Meter/Fcs (76)/ Spot
Meter (77)/ Exposure (77)
EV AE Shift (78)
Shutter Speed (78)
IRIS (78)
Intelligent Auto (36)
Slide show button
101-0005 Data file name (32)
 Protected image (51)
Flash (83)/
Red Eye Reduction (84)
Indicators and their positions are approximate
and may differ from what you actually see.
Some indicators may not appear, depending on
your camcorder model.


Parts and controls
Figures in ( ) are reference pages.
 Built-in microphone (39)
 Active Interface Shoe
The Active Interface Shoe supplies power to
accessories such as a video light, a flash, or a
microphone (sold separately). The accessory
can be turned on or off as you open or close
the LCD screen of your camcorder. Refer to
the operating instructions supplied with your
accessory for details.
The Active Interface Shoe has a safety device
for fixing the installed accessory securely. To
connect an accessory, press down and push
it to the end, and then tighten the screw. To
remove an accessory, loosen the screw, and
then press down and pull out the accessory.
When you open or close the shoe cover,
slide it as indicated by the arrow.
When you are recording movies with an
external flash (sold separately) connected
to the accessory shoe, turn off the power of
the external flash to prevent charging noise
being recorded.
You cannot use an external flash (sold
separately) and the built-in flash at the same
time.


