Advanced Global Technology QSP-660 - Manual (Page 10)

Advanced Technology Video, Inc.
QSP-660: Instructions for Basic Operation and Installation Page 10
Display Sequence Set Up
1: Hold Each Image for: 3 Sec.
2: Full Camera Call Up . . .
3: Quad . . .
4: PIP . . .
5: Dual PIP . . .
6: Split/Squish
PIP: Restore Default Settings
Camera: Select
5 is VCR + 1
6 is VCR + 2
DISPLAY: Accept and Return
Sequence Set Up
A unique feature of the QSP-660 is the option to customize the display sequence format to suit your
application. You can program a specific selection of cameras for sequencing.
Selecting:
1. Enters edit mode for hold (dwell) time.
While editing:
1 - 4 Used to enter digits 1 through 4
5 - 6 VCR + 1-2
DISPLAY Completes the entry if less than three digits
and returns to the previous value if no
digits are entered.
2. Enters Full Camera Display Sequence format menu.
3. Enters Quad Display Sequence menu.
4. Enters PIP Display Sequence menu.
5. Enters Dual PIP Display Sequence menu.
6. Enters Split/Squish Display Sequence format menu.
Note: Any changed camera display sequence will not be
applied until the display sequencing mode is activated by the front panel button.