Advanced Global Technology QSP-660 - Manual (Page 11)

Advanced Technology Video, Inc.
QSP-660: Instructions for Basic Operation and Installation Page 11
Sequencing Format Screens
The above screens show the factory default values. The most commonly used sequencing is the full frame
or quad formats as shown above. You can customize any or all formats, and may have more than one
section of a multi-camera display defined for sequencing. For any particular camera display, cameras are
sequenced in ascending numerical order and cameras cannot be repeated. For example, if the pattern
“1,3,4,2,1,3” were entered, the software will translate this to “. 2 . 4 “
Quad Display Sequence
1: Upper Left: 1 . . .
2: Upper Right: . 2 . .
3: Lower Left:
. . 3 .
4: Lower Right: . . . 4
Enter Cameras you want
displayed in the sequence
Camera: Select
DISPLAY: Accept and Return
Full Camera Display
Sequence
1: Cameras: 1 2 3 4
Enter Cameras you want
displayed in the sequence
Camera: Select
DISPLAY: Accept and Return
PIP Display Sequence
1: Background: As is
2: Insert: 1 2 3 4
Enter Cameras you want
displayed in the sequence
Camera: Select
DISPLAY: Accept and Return
Dual PIP Display Sequence
1: Background: As is
2: Insert 1:
1 2 3 4
3: Insert 2: As is
Enter Cameras you want
displayed in the sequence
Camera: Select
DISPLAY: Accept and Return
Split/Squish Display Sequence
1: Left: As is
2: Right: 1 2 3 4
Enter Cameras you want
displayed in the sequence
Camera: Select
DISPLAY: Accept and Return