Advanced Global Technology QSP-660 - Manual (Page 9)

Advanced Technology Video, Inc.
QSP-660: Instructions for Basic Operation and Installation Page 9
Other Display Options
1: Location Lower Right
2: Display On
Camera: Select
DISPLAY: Accept and Return
Camera Set Up
1: Labels on Display: On
2: Change Labels . . .
PIP: Restore Default Settings
Camera: Select
DISPLAY: Accept and Return
Camera Labels Characters
PIP: Space 0
1. T . . . . . . . . . . 1: ABC1
2. 2 2: DEF2
3. 3 3: GHI3
4. 4 4: JKL4
5: MNO5
6: PQR6
7: STU7
8: VWX8
9: YZ9
5 is VCR + 1
6 is VCR + 2
7 is VCR + 3
8 is VCR + 4
9 is QUADRANT
SEQUENCE: Next Character
DISPLAY: Accept Label
Other Display Options
This menu determines the display behavior of the date and
time information for both the VCR and monitor camera
displays.
Selecting:
1. Toggles the time and date display location through
any one of the four display quadrants for live camera
displays.
2. Toggles the time and date for the monitor display
On/Off.
A DVANCED F UNCTION M ENUS
This section describes the use of the advanced functions of the QSP-660. The following features allow you to
customize the operation of your QSP-660 as necessary to complete your installation.
Camera Set Up
This menu determines the display behavior of the camera
labels and allows access to menus for entering/changing
labels.
Selecting:
1. Toggles the camera labels On/Off for the monitor display.
2. Enters Camera Labels menu to review, enter, or change
camera labels.
Camera Label Changing
This menu is used for adding/changing labels that are
associated with each of the four cameras.
Selecting:
1 - 4 Selects the camera for editing and exposes the
legend at the right hand side of the screen. After
pressing a camera button 1 through 4, the display
will appear as shown.
Using the legend, any character can be entered in the present
character location. The SEQUENCE button is used to move
to the next location.