Self-diagnosis display/warning indicators – Sony HDR-CX520V User Manual
Page 58
US
Self-diagnosis display/Warning
indicators
If indicators appear on the LCD screen,
check the following.
If the problem persists even after you
have tried to fix a couple of times, contact
your Sony dealer or local authorized Sony
service facility.
C:04:
The battery pack is not an “InfoLITHIUM”
battery pack H series. Use an “InfoLITHIUM”
battery pack H series (p. 13).
Connect the DC plug of the AC Adaptor to
your camcorder securely (p. 13).
C:06:
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
C:13: / C:32:
Remove the power source. Reconnect it and
operate your camcorder again.
E:20: / E:31: / E:61: / E:62:
/ E:91: / E:92: / E:94: /
E:95: / E:96:
Turn on the power again to restore your
camcorder by pressing RESET (p. 66).
101-0001
When the indicator flashes slowly, the file is
damaged or unreadable.
Battery power is low.
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
No “Memory Stick PRO Duo” media is
inserted (p. 47).
When the indicator flashes, there is not
enough free space for recording images. Delete
unnecessary images (p. 45), or format the
“Memory Stick PRO Duo” media (p. 45) after
storing the images on other media.
The Image Database File is damaged. Check
the data base file by touching
(MENU)
[REPAIR IMG.DB F.] (under
[MANAGE MEDIA] category) the
recording medium.
The “Memory Stick PRO Duo” media is
damaged. Format the “Memory Stick PRO
Duo” media with your camcorder (p. 45).
Incompatible “Memory Stick Duo” media is
inserted (p. 47).
Access to the “Memory Stick PRO Duo” media
was restricted on another device.
There is something wrong with the flash.
The amount of light is not sufficient. Use the flash.
The camcorder is unsteady. Hold the camcorder
steady with both hands. However, note that
the camera-shake warning indicator does not
disappear.
The recording media is full. Delete unnecessary
images (p. 45).
Photos cannot be recorded during processing.
Wait for a while, then record.