Sony HDR-MV1 - Manual (Page 122)

User Guide
Print Search
Operation Search
Before use
Getting started
Recording
Playback
Playing images on a TV
Saving images with a
computer
Using the Wi-Fi function
Customizing your
camcorder
Troubleshooting
Maintenance and
precautions
Contents list
Top page > Customizing your camcorder > Setup > USB Power Supply
USB Power Supply
Set whether to use the USB power supplied function when the camcorder is
connected to a computer or a USB device using the USB cable.
1.
[Setup] [ Connection] [USB Power Supply].
2. Select the desired item.
On
Power is supplied when connected using the USB cable.
Off
Disables USB power supplied function even if you connect the camcorder to a
device such as a computer using a USB cable.
Notes
If you changed this setting while the USB cable was connected to the
camcorder, disconnect the USB cable and connect it again.
The setting of [USB Power Supply] is effective only when the camcorder is
connected to a USB device that is compatible with the 500 mA or more power
supply standard.
Only the playback functions are available while the camcorder is connected to a
USB device that is compatible with the 500 mA power supply standard.
To record files using the [USB Power Supply] function, use an AC-UD10 AC
Adaptor (sold separately) with the battery pack attached to the camcorder.
Back to top
Copyright 2013 Sony Corporation
122