Sony HDR-MV1 - Manual (Page 34)

Notes
You can use only NP-BX1 (supplied) with your camcorder.
In the default setting, the camcorder turns itself off not to consume the battery
power when no operations are performed for about 5 minutes ([Power Save]).
To prevent staining the terminal, short-circuiting, etc., be sure to use a plastic
bag to keep away from metal materials when carrying or storing the battery
pack.
To remove the battery pack
Turn off your camcorder, remove the battery cover, and then remove the battery
pack.
Be careful not to drop the battery pack.
To check the remaining battery power
An icon indicating the remaining battery power is displayed.
High Low Empty
It will take approximately 1 minute to display the correct remaining battery power.
The remaining battery power may not be displayed correctly depending on
ambient conditions and the environment in which you are using your camcorder.
Your camcorder cannot display the remaining battery life in minutes using the
“InfoLITHIUM” battery.
Back to top
Copyright 2013 Sony Corporation
34