Anritsu S331C - Manual (Page 31)

MARKER Choosing MARKER causes the soft keys, below, to be displayed and the corre-
sponding values to be shown in the message area. Selected frequency marker or
distance marker values may be changed using the keypad or Up/Down arrow
key.
q M1 — Selects the M1 marker parameter and opens the M1 marker second
level menu.
q ON/OFF — Turns the selected marker on or off.
q EDIT — Opens the selected marker parameter for data entry. Press
ENTER when data entry is complete or ESCAPE to restore the previous
value.
q MARKER TO PEAK — Places the selected marker at the frequency or
distance with the maximum amplitude value.
q MARKER TO VALLEY — Places the selected marker at the frequency or
distance with the minimum amplitude value.
q BACK — Returns to the Main Markers Menu.
q M2 through M4 — Selects the marker parameter and opens the marker second
level menu.
q ON/OFF — Turns the selected marker on or off.
q EDIT — Opens the selected marker parameter for data entry. Press
ENTER when data entry is complete or ESCAPE to restore the previous
value.
q DELTA (Mx-M1) — Displays delta amplitude value as well as delta fre-
quency or distance for the selected marker with respect to the M1 marker.
q MARKER TO PEAK — Places the selected marker at the frequency or
distance with the maximum amplitude value.
q MARKER TO VALLEY — Places the selected marker at the frequency or
distance with the minimum amplitude value.
q BACK — Returns to the Main Markers Menu.
q M5 — Selects the M5 marker parameter and opens the M5 second level
menu.
q ON/OFF — Turns the selected marker on or off.
q EDIT — Opens the selected marker parameter for data entry. Press
ENTER when data entry is complete or ESCAPE to restore the previous
value.
q PEAK BETWEEN M1 & M2 — Places the selected marker at the fre-
quency or distance with the maximum amplitude value between marker
M1 and marker M2.
q VALLEY BETWEEN M1 & M2 — Places the selected marker at the fre-
quency or distance with the minimum amplitude value between marker
M1 and marker M2.
q BACK — Returns to the Main Markers Menu.
q M6 — Selects the M6 marker parameter and opens the M6 second level
menu.
2-16
Chapter 2 Functions and Operations