Func tion hard keys 2-3, Front panel overview, Chapter 2 functions and operations – Anritsu S331C User Manual
Page 17: Figure 2-1. site master soft keys
Front Panel Overview
The Site Master menu-driven user interface is easy to use and requires little training. Hard
keys on the front panel are used to initiate function-specific menus. There are four function
hard keys located below the display, Mode, Frequency/Distance, Amplitude and Sweep.
There are seventeen keypad hard keys located to the right of the display. Twelve of the key-
pad hard keys perform more than one function, depending on the current mode of operation.
The dual purpose keys are labeled with one function in black, the other in blue.
There are also six soft keys that change function depending upon the current mode selec-
tion. The current soft key function is indicated in the active function block to the right of
the display. The locations of the different keys are illustrated in Figure 2-1.
The following sections describe the various key functions.
2-2
Chapter 2 Functions and Operations
Soft Keys
Active
Function
Block
Keypad
Hard
Keys
Function Hard Keys
HOLD
RUN
START
CAL
AUTO
SCALE
SAVE
SETUP
RECALL
SETUP
LIMIT
MARKER
SAVE
DISPLAY
RECALL
DISPLAY
MODE
FREQ/DIST
AMPLITUDE
SWEEP
SYS
ENTER
CLEAR
ESCAPE
ON
OFF
/
1
2
4
5
6
7
8
9
0
3
+
-
.
Site Master S332C
Figure 2-1.
Site Master Soft Keys