Sym bols 2-19, Self test 2-19, Er ror codes 2-19 – Anritsu S331C User Manual
Page 33: Self test er rors 2-19
SEGMENT 1
SEGMENT 2
SEGMENT 3
SEGMENT 4
SEGMENT 5
BACK
q
LIMIT BEEP
— Turns the audible limit beep indicator on or off.
SYS
Displays the System menu softkey selections.
q
OPTIONS
— Displays a second level of functions:
q
UNITS
— Select the unit of measurement (English or metric).
q
PRINTER
— Displays a menu of supported printers. Use the Up/Down
arrow key and
ENTER
key to make the selection.
q
FIXED CW
— Toggles the fixed CW function ON or OFF. When OFF, a
narrow band of frequencies centered on the selected frequency is gener-
ated. When CW is ON, only the center frequency is generated. Output
power is pulsed in all modes.
q
CHANGE DATE FORMAT
— Toggles the date format between
MM/DD/YY, DD/MM/YY, and YY/MM/DD.
q
BACK
— Returns to the top-level SYS Menu.
q
CLOCK
— Displays a second level of functions:
q
HOUR
— Enter the hour (0-23) using the Up/Down arrow key or the key-
pad. Press
ENTER
when data entry is complete or
ESCAPE
to restore the
previous value.
q
MINUTE
— Enter the minute (0-59) using the Up/Down arrow key or the
keypad. Press
ENTER
when data entry is complete or
ESCAPE
to restore
the previous value.
q
MONTH
— Enter the month (1-12) using the Up/Down arrow key or the
keypad. Press
ENTER
when data entry is complete or
ESCAPE
to restore
the previous value.
q
DAY
— Enter the day using the Up/Down arrow key or the keypad. Press
ENTER
when data entry is complete or
ESCAPE
to restore the previous
value.
q
YEAR
— Enter the year (1997-2036) using the Up/Down arrow key or
the keypad. Press
ENTER
when data entry is complete or
ESCAPE
to re-
store the previous value.
q
BACK
— Returns to the top-level SYS menu.
q
SELF TEST
— Start an instrument self test.
q
STATUS
— Displays the current instrument status, including calibration sta-
tus, temperature, and battery charge state. Press ESCAPE to return to opera-
tion.
q
Language
— Pressing this soft key immediately changes the language used
to display messages on the Site Master display. Choices are English, French,
German, Spanish, Chinese, and Japanese. The default language is English.
2-18
Chapter 2 Functions and Operations