In for ma tion re quired for a line sweep 4-2, Chapter 4 cable & antenna measurements – Anritsu S331C User Manual
Page 54
Advertising
Chapter 4
Cable & Antenna
Measurements
Introduction
This chapter provides a description of cable and antenna measurements, including line
sweeping fundamentals and line sweeping measurement procedures, available when the
Site Master is in frequency or DTF mode.
Line Sweep Fundamentals
In wireless communication, the transmit and receive antennas are connected to the radio
through a transmission line. This transmission line is usually a coaxial cable or waveguide.
This connection system is referred to as a transmission feed line system. Figure 4-1 shows
an example of a typical transmission feed line system.
4-1
4
Figure 4-1.
A Typical Transmission Feed Line System
Advertising