Chap ter 6 - power mea sure ment, In tro duc tion 6-1, Power mea sure ment 6-1 – Anritsu S331C User Manual
Page 73: Field strength measurement
Field Strength Measurement
The procedure below details steps required making a field strength measurement with the
Site Master.
Required Equipment
q
Site Master Model S114C or S332C with tracking generator option
q
Antenna of your choice
Procedure
Step 1. Press the
ON/OFF
key on the Site Master.
Step 2. Use the antenna editor feature of the Site Master Software Tools to define an an-
tenna.
Step 3. Upload the antenna information to the Site Master.
Step 4. Press the
MEAS
key.
Step 5. Select the
FIELD STRENGTH
soft key.
Step 6. Press the
SELECT ANTENNA
soft key.
Step 7. Use the Up/Down arrow key to choose the desired antenna and then press the
ENTER
key
Step 8. To change the unit of measurement, press the
AMPLITUDE
hard key, and then
press the
UNITS
soft key to select dB, dBV, dBmV or dB
mV.
The Site Master will automatically scale the display by the antenna factors selected.
5-8
Chapter 5 Spectrum Analyzer Measurements