Sony BDV-E2100 User Manual

Page 41

Advertising
background image

41

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100
(PMRF 06)\4446733121_US (U2)\080OTH.fm

masterpage: Right

Oth

e

r Op

eratio

ns

2

Press

B/b to select

[Setup].

3

Press

V/v to select [Audio

Settings], then press

.

4

Press

V/v to select [Speaker

Settings], then press

.

The [Select speaker layout.] display
appears.

5

Press

V/v to select setting

according to your speakers
placement, then press

.

• [Standard]: The surround speakers

are installed in the rear position.

• [All Front]: All speakers are installed

in the front position.

The [Distance] and [Level] settings are reset
to default settings each time you change the
speaker layout setting.

6

Press

V/v to select the item, then

press .

7

Press

V/v to adjust the

parameter.

8

Press

B/b and

to confirm the

settings.

Check the following settings.

x [Distance]
Be sure to set the parameters of the distance
from the listening position to the speakers.
You can set the parameters from 0 to
23 feet (0.0 to 7.0 meters).

[Front Left/Right] 10 ft/3.0 m: Set the front
speaker distance.
[Center] 10 ft/3.0 m: Set the center speaker
distance.
[Surround Left/Right] 10 ft/3.0 m: Set the
surround speaker distance.
[Subwoofer] 10 ft/3.0 m: Set the subwoofer
distance.

You can change the unit of measurement (feet or
meters) by pressing the color button (RED).

x [Level]
You can adjust the sound level of the
speakers. You can set the parameters from
–6.0 dB to +6.0 dB. Be sure to set [Test
Tone] to [On] for easy adjustment.

[Front Left/Right] 0.0 dB: Set the front
speaker level.
[Center] 0.0 dB: Set the center speaker
level.
[Surround Left/Right] 0.0 dB: Set the
surround speaker level.
[Subwoofer] 0.0 dB: Set the subwoofer
level.

x [Test Tone]
The speakers will emit a test tone to adjust
[Level].

[Off]: The test tone is not emitted from the
speakers.
[On]: The test tone is emitted from each
speaker in sequence while adjusting level.
When you select one of the [Speaker
Settings] items, the test tone is emitted
from each speaker in sequence.
Adjust the sound level as follows.

1

Set [Test Tone] to [On].

2

Press

V/v to select [Level], then

press .

3

Press

V/v to select the speaker type

you want, then press

.

4

Press

B/b to select the left or right

speaker, then press

V/v to adjust the

level.

5

Press .

6

Repeat Steps 3 to 5.

Note

Tip

Advertising
This manual is related to the following products: