Sony BDV-E2100 User Manual

Page 57

Advertising
background image

57

US

BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100

4-446-733-12(1)

D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100
(PMRF 06)\4446733121_US (U2)\100ADD.fm

masterpage: Right

A

d

d

ition

al In

form

atio

n

An image is not displayed on the
entire TV screen.

t Check the setting of [TV Type] in

[Screen Settings] (page 46).

t The aspect ratio on the disc is fixed.

Color irregularity occurs on the TV
screen.

t If the speakers are used with a CRT-

based TV or projector, install the
speakers at least 0.3 meters (1 foot)
from the TV set.

t If the color irregularity persists, turn

off the TV set once, then turn it on after
15 to 30 minutes.

t Make sure that no magnetic object

(magnetic latch on a TV stand, health
care device, toy, etc.) is placed near the
speakers.

There is no sound.

t The speaker cords are not connected

securely.

t Check the speaker settings (page 40).

There is no sound from the TV via the
HDMI (OUT) jack when using the
Audio Return Channel function.

t Set [Control for HDMI] in [HDMI

Settings] of [System Settings] to [On]
(page 50). Also, set [Audio Return
Channel] in [HDMI Settings] of
[System Settings] to [Auto] (page 50).

t Make sure that your TV is compatible

with the Audio Return Channel
function.

t Make sure that an HDMI cable is

connected to a jack on your TV that is
compatible with the Audio Return
Channel function.

The system does not output sound of
TV programs correctly when
connected to a set-top box.

t Set [Audio Return Channel] in [HDMI

Settings] of [System Settings] to [Off]
(page 50)
.

t Check the connections (page 20).

Severe hum or noise is heard.

t Move your audio equipment away

from the TV.

t Clean the disc.

The sound loses stereo effect when
you play a CD.

t Select stereo sound by pressing

AUDIO (page 37).

The sound outputs from the center
speaker only.

t Depending on the disc, the sound may

output from the center speaker only.

No sound or only a very low-level
sound is heard from the surround
speakers.

t Check the speaker connections and

settings (pages 18, 40).

t Check the sound mode setting

(page 24).

t Depending on the source, the effect of

the surround speakers may be less
noticeable.

t A 2-channel source is being played.

Distortion occurs in the sound of a
connected equipment.

t Reduce the input level for the

connected equipment by setting
[Attenuate - AUDIO] (page 48).

A sudden loud music is heard.

t The build-in sound demonstration is

activated. Press VOL – to reduce the
volume or press x to stop the
demonstration.

Sound

Advertising
This manual is related to the following products: