Sony CMT-L7HD - Manual (Page 12)

12 GB
Inserting two size AAA
(R03) batteries into the
remote
Tip
When the remote no longer operates the system,
replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to prevent possible damage from
battery leakage and corrosion.
Using the wall hanging
bracket
You can hang the system on the wall using the
supplied wall hanging bracket.
The screws for attaching the wall hanging
bracket to the wall are not supplied. When
installing the bracket by yourself, be sure to use
screws appropriate for the type of wall. Sony
cannot take responsibility for any damages or
injury due to installation.
Safety precautions
• The supplied bracket is for use with the Sony
Interior Hi-Fi Component System CMT-L7HD
only. Using this item for purposes other than to
hang the system on the wall may result in
accidents.
• The component system CMT-L7HD (7.9 kg) and
the wall hanging bracket (0.6 kg) have a
combined weight of 8.5 kg. Therefore, for safety
reasons, the bracket should be attached securely
to a wall made from materials capable of
supporting a load of 50 kg or more.
• When you hang the system on the wall, make
sure the left and right speakers are both attached
or both detached. Attaching one speaker without
the other may cause the system to drop and
injure someone.
Preparation
• The screws for attaching the wall hanging
bracket to the wall are not supplied. Be sure
to purchase screws suited to the wall
materials.
• If the wall materials cannot support a load of
50 kg or more, be sure to reinforce the wall.
Hanging the system on the
wall
1 Fix the wall hanging bracket to the wall
using 8 screws (not supplied).
Note
Be sure to secure the bracket in a level position.
2 Set the speaker cord into the speaker cord
groove at the bottom of the speaker.
Otherwise, the speaker cord could be
damaged.
3 Attach the speakers.
Afterwards, push down on the speakers to
make sure they are securely fastened to the
main unit.
4
Connect the speaker cords to the SPEAKER
jacks.