Sony CMT-L7HD - Manual (Page 47)

47 GB
M-crew
System requirements
The following hardware and software are
necessary to use the “M-crew for CMT-L7HD”
software.
s IBM PC/AT or compatible (This software
does not run on the Apple
Macintosh.)
s CPU* 1 : Intel Pentium II 333 MHz/Celeron
366 MHz or higher
s Video board and display driver:
SVGA (800
×
600 pixels), 65,536
colors or more.
s Hard disk space:
20 MB* 2 or more
s USB port:
1 or more
s OS: Windows 98/Windows 98SE/
Windows 2000*
3 /Windows Me/
Windows XP* 3 (This software
does not run on Microsoft
Windows 3.1, Windows 95 or
Windows NT.)
s Media player:
Windows Media Player 6.4 or
higher is required in order to play
audio files on the computer.
s Video monitor:
SVGA (800
×
600 pixels), 65,536
colors or more.
* 1 The operation of this software is not guaranteed on
some computers with Pentium-compatible CPU
chips, such as the AMD K6 (e.g., sound skipping
may occur during playing of an audio file).
* 2 Another 20 MB of hard disk space is required to
install LabelMaker 5.1.
* 3 Be sure to log on through the administrator’s
account to install this software and setup devices
on a computer running Windows 2000 or Windows
XP.
Notes
• The proper operation of this software is not
guaranteed on some computers even if they meet
the requirements above.
• The proper operation of this software is not
guaranteed on computers that you constructed
yourself or on computers with an operating system
that you upgraded yourself.
• Do not use a USB hub. If multiple USB devices are
connected to the hub, this software may not operate
the system connected to the computer properly.
• This software can be used only with an English-
language operating system. If used in a different
language environment, it may not function properly
or text may not be correctly displayed.
Installing the software
Use this procedure to install this software onto
your computer’s hard disk. Be sure to start up
Windows in advance.
Notes
• Be sure to install this software before connecting
the system to your computer. If not, this
software may not function properly.
• Be sure to log on through the administrator’s
account to install this software (for Windows 2000/
Windows XP).
1
Load the supplied “M-crew for
CMT-L7HD” CD-ROM into the CD-ROM
drive of your computer.
The window will open with the
(InstallDlg.exe) icon displayed.
Note
If the window does not open, use Windows
Explorer to open the window by double-clicking
the “M-crew for CMT-L7HD” CD-ROM icon.
2
Double-click the (InstallDlg.exe)
icon.
The setup window appears.
continued